"When a man works with his hands, he is a laborer. When a man works with his hands and his head, he is a craftsman. When a man works with his hands, his head and his heart, he is an artist. When a man works with his hands, his head, his heart, and his feet, he is a salesman!" -Author Unknown
|
Similar to the ChemCurb products, the MiniCurb is used to seal small penetrations, including HVAC conduit and drains, exterior light supports, etc. With a special fiberglass and reinforced with nylon, assembly is quick and won't be disturbed once in place.
Installation Directions (taken from MiniCurb Tech Information): 1. Remove asphalt or cement around penetration with a wire brush and clean residual dirt and oil with alcohol. Clean surrounding roofing material as well.
(TPO should be primed with Chem Link TPO Primer). 2. Seal the base of the penetration with M-1 to prevent drainage of sealant into building. 3. Prime the penetration with a film of M-1 to 2 inches above the roof surface. 4. Coat the bottom of the flange with a double bead of M-1. 5. Place the coated MiniCurb components around the penetration and slip the edges together unitizing them into a solid ring. 6. Coat Exterior Seam with Bead of M-1. 7. Firmly press the assembled MiniCurb down on the roof membrane until excess adhesive squeezes out at the edges. Wipe off excess adhesive. 8. Fill the interior of the MiniCurb with 1-Part pourable sealer. Make sure the interior is filled to the top to prevent water from accumulating at the top.
**Ensure the most recent MSDS and tech guides are being followed as proper use and application are the applicator's responsibility.**
FEATURES: Installs in under 5 minutes 1-Part MiniCurb Pourable Sealer New "Slip Fit" Technology Versatile Adaptable
|
BENEFITS: Quick and Convenient Designed to self level and cure quickly Easy installation Useful in a variety of construction applications Can be surface mounted or flashed in with traditional roofing materials |
